LASER TREE 5W Optical Output Power Laser Module

Sale price$79.00 Regular price$129.00

LT-40W-AA

Laser cutter module can cut through 4mm thickness plywood by one pass at speed of 80-100mm/min.

Model

LT-40W-AA

Optical Power

5W(±0.5W)

Input

12V 1.5-2A

Wavelength

450nm(±10nm)

Focus Length

45mm

FEATURES

5W optical power output, it adopts built-in beam compression optical technology, so that the beam size at the focal point is around 30um*130um. Due to the bean width of 30um in X-direction, it makes the engraving accuracy reach 0.03mm, making it possible to engrave photos with high resolution.

1. Meet most of your cutting & engraving needs.
2.With driver adapter and sliding plate, wide electrical and mounting compatibility.
3.Smaller beam size brings superb cutting and engraving effect.
4. Excellent Fan Cooling Design Excellent heat dissipation capability.
5. Air assist improves cutting performance and reduces burnt marks.
6. Prepare a replaceable protective lens for your use.
7.Detachable magnetic cover& anti-blue light view window.
8. Reliable and professional parts replacement & products service system makes it a longer service life.

Beam Compressed Spot

Professional Air Assist

Air tube outer diameter: 8 mm;
inner diameter: 6 mm

High Speed Air Assist

The LT-40W-AA uses the latest metal curved nozzle, which is different because it has an advanced hydrodynamic design that makes better use of air pressure.

Magnetic Eye Protection Cover

The laser head comes with a laser shield to filter laser radiation and avoid accidental laser exposure for safer operation.Note: Even with this design, goggles should always be worn when operating the machine.

Cutting Through 4mm Bass Plywood

Ultra-Fast Engraving on Stainless Steel - 800mm/min

Widely Compatible Design

Can be installed on Ato**tack, ZBAIT*, Ortu*, Two Tr**s and other models of DIY laser engraving machines

Reference Settings for Cutting

For cutting, the ideal position of the focal point is in the middle of the material, the focal length of LT-40W-AA is 45mm, the length of the air nozzle is 38mm, so the focal point position is 7mm(45-38mm) below the air nozzle.
Cut 4mm plywood, the distance from the air nozzle to the surface of the material should be 7mm-4mm/2=5mm.
Put a 5mm thick focus fixing plate between the nozzle and the board for the best cutting point.

Reference Settings for Engraving

For engraving, the focal point is at the surface of the material, the focal length of LT-40W-AA is 45mm, the length of the air nozzle is 38mm, so the focal point position is 7mm(45-38mm) below the air nozzle.
Put a 7mm thick focus fixing plate between the nozzle and the board for the best engraving point.

Package Lists